Questions? Start a Support Ticket
User Registration
Customer Login

Knowledgebase

Portal Home > Knowledgebase > Articles Database > does it mean my hdd will fail ?


does it mean my hdd will fail ?




Posted by ttgt, 03-14-2014, 01:38 AM
Hi, i use 4 hdd to do software raid10 with cloudlinux/cpanel, i use smartctl --all /dev/sda~smartctl --all /dev/sdd to test my hdd, and one shows with the following,does it mean the hdd will fail ? thanx root@server [~]# smartctl --all /dev/sdb smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-458.23.2.lve1.2.52.el6.x86_64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.D Device Model: Hitachi HDS721010DLE630 Serial Number: MSK5215H0B2TPG LU WWN Device Id: 5 000cca 37cc50a94 Firmware Version: MS2OA5R0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Fri Mar 14 13:26:08 2014 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7847) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 093 093 016 Pre-fail Always - 720916 2 Throughput_Performance 0x0005 142 142 054 Pre-fail Offline - 71 3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 185 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 6 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 118 118 020 Pre-fail Offline - 33 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 17079 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 6 194 Temperature_Celsius 0x0002 222 222 000 Old_age Always - 27 (Min/Max 20/42) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 6 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mmS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6 occurred at disk power-on lifetime: 16958 hours (706 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 e0 a0 48 46 02 Error: UNC at LBA = 0x024648a0 = 38160544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 80 45 46 40 00 4d+03:00:36.801 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 4d+03:00:36.800 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 e0 00 4d+03:00:36.800 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 4d+03:00:36.800 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 4d+03:00:36.800 SET FEATURES [Set transfer mode] Error 5 occurred at disk power-on lifetime: 16958 hours (706 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 e0 a0 48 46 02 Error: UNC at LBA = 0x024648a0 = 38160544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 80 45 46 40 00 4d+03:00:33.315 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 4d+03:00:33.315 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 e0 00 4d+03:00:33.314 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 4d+03:00:33.314 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 4d+03:00:33.314 SET FEATURES [Set transfer mode] Error 4 occurred at disk power-on lifetime: 16958 hours (706 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 e0 a0 48 46 02 Error: UNC at LBA = 0x024648a0 = 38160544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 80 45 46 40 00 4d+03:00:30.020 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 4d+03:00:30.019 SET FEATURES [Reserved for Serial ATA] 27 00 00 00 00 00 e0 00 4d+03:00:30.019 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 4d+03:00:30.019 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 4d+03:00:30.019 SET FEATURES [Set transfer mode] Error 3 occurred at disk power-on lifetime: 16958 hours (706 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 e0 a0 48 46 02 Error: UNC at LBA = 0x024648a0 = 38160544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 20 80 c1 46 40 00 4d+03:00:26.692 READ FPDMA QUEUED 60 00 18 80 45 46 40 00 4d+03:00:26.692 READ FPDMA QUEUED 60 00 10 80 bd 46 40 00 4d+03:00:26.692 READ FPDMA QUEUED 60 00 08 80 b9 46 40 00 4d+03:00:26.692 READ FPDMA QUEUED 60 00 00 80 b5 46 40 00 4d+03:00:26.692 READ FPDMA QUEUED Error 2 occurred at disk power-on lifetime: 16958 hours (706 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 e0 a0 48 46 02 Error: UNC at LBA = 0x024648a0 = 38160544 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 80 c1 46 40 00 4d+03:00:23.378 READ FPDMA QUEUED 60 00 f0 80 b5 46 40 00 4d+03:00:23.355 READ FPDMA QUEUED 60 00 e8 80 b9 46 40 00 4d+03:00:23.355 READ FPDMA QUEUED 60 00 e0 80 bd 46 40 00 4d+03:00:23.355 READ FPDMA QUEUED 60 00 d8 80 45 46 40 00 4d+03:00:23.355 READ FPDMA QUEUED SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Posted by UnfinishedSentenc, 03-14-2014, 04:21 AM
Every hard drive I have had problems with would start to show "Current Pending" and/or "Offline Uncorrectable" greater than 0. Not sure if what you are seeing there is a failing hard drive or not. Try run a long self test and see if you get any bad sector hits. Then when it finishes in about 2 hours try again


Was this answer helpful?

Add to Favourites Add to Favourites    Print this Article Print this Article

Also Read
DDos Botnet Issues (Views: 679)
Volumedrive? (Views: 791)
Affiliate Program Help (Views: 779)
Hostingplex Down (Views: 742)
Highly Urgent - mail server not found for some clients (Views: 673)


Language:

Our Services

Client Menu

Legal

Terms of Service | Privacy Policy | Refund Policy | Affiliates
Copyright © 2015 DC International LLC in partnership with Bragin IT Solutions Inc. - All Rights Reserved.